This tutorial will show you how to pair the iLock Z-Wave Lock (106-282) into the Ness G1 Z-Wave Gateway Controller (101-800).
First you need to make sure you have your G1 setup.
1. Once setup and ready to be used, tap on device from the main screen.
2. Tap on the + icon to add a new device to the G1.
3. Select 'Other Z-Wave Device' from the list.
4. It will then play a 'ding' noise from the G1 Gateway. If you hear it, press Yes.
Now you need to send the pair command to the G1 from the iLock.
5. Press * # 123456 # to enter programming mode on the iLock. (you may need to press * to wake up the screen)
6. At this stage, everything should be lit up except for 8, 9, and #.
7. Press 0 to send the pairing command.
8. The G1 Gateway should make a 'Ding' sound. If so, press Yes in the app.
9. After a few seconds (5-10 seconds) it should ask you to name the device. Name it anything you like.
Pairing is now complete. You can now find the device in the list and tap on the icon and it should unlock / lock the door.