This tutorial will explain how to manage users in the iLock (106-282) using the Ness G1 Z-Wave Gateway (101-800).
1. Open the zComms app and connect to your G1 Gateway.
2. Tap on the hamburger icon up the top right of the main screen.
3. Select 'User Management' from the list.
4. Tap on the add new user button.
5. Enter in the required fields:
User Account
This is the G1 Gateway ID.
You can get this from the back of the G1 Gateway or Gateway setting screen in the app.
Password
This is the password to your G1 Gateway when you set it up.
If you forgot this password, and you can still connect to your gateway using the app, then you can export the QR code in the Gateway settings in the app and then scan the QR code and it will show you what the password is.
Authority
Leave that as Settings.
User Code
This is the user code you are wanting to add to the iLock. (For Example 1234)
Controlled Device
This will tell the G1 Gateway which locks to send the new user code to.
Simply tap on this and then tick the boxes next to the locks you want to add the code to.
Allowed Time
This will allow you to add times that this code will work.
Once the above has been set, tap on the update button up the top of the screen and this new user code will be sent to the iLock.
You can then try out the code by entering the code followed by # on the iLock.