This is a quick cheat sheet on what you need to do for enabling Armor IP reporting on your Ness 4G XCEL panel via SMS.
Please ensure your desired sim card is activated prior to completing the following;
Please also contact your control room and find out whether they are using an IP address or Domain name.
Create a new message to the mobile number of the panel
1. Enable the panel for armorIP communications)
P[MasterCode]E P[InstallerCode]E P86E 1E
2.Setting area account numbers
P[MasterCode]E P72E [Account Number]E - Account Number 1 for Area 1
P[MasterCode]E P73E [Account Number]E - Account Number 2 for Area 2
3. Inputting control room IP Address or Domain Name
*IP Address*
P[MasterCode]E P[InstallerCode]E P170E [IP Address : Port]E
*Domain Name*
T[MasterCode]E,P[InstallerCode]E,DN1,[Domain Name]:[Port No]
Example: T123E,P000000E,DN1,www.ness.com.au:9467
4. Assigning Poll Time interval
P[MasterCode]E P[InstallerCode]E P85E [NewTime] E
( 5=4hr, 6=12hr, 7=24hr, 8=OFF)
NOTES
1) The SMS reply includes the Domain Name, Port No. and the
current IP address (if found) for the domain name.
2) If you are using a Navigator Keypad, the programmed Domain
Name and Port No can be viewed on the Network Details page (in
Program mode).
3) If the Domain Name has been programmed via SMS then
P170E must not be further programmed by keypad. The option
will display 0.0.0.0 via keypad display.