P1E-P16E - Client Codes 1 To 16 - 15,16
P17E - Entry Delay Time 1 (20Secs) - 18
P170E - Entry Delay Time 1 (20Secs) - 18
P171E - Entry Delay Time for AREA 1 (20Secs) - 18
P172E - Entry Delay Time for AREA 2 (20Secs) - 18
P173E - Entry Delay Time for AREA 3 (20Secs) - 18
P18E - Exit Delay Time (60Secs) - 19
P181E - Exit Delay Time for AREA 1 (60Secs) - 19
P182E - Exit Delay Time for AREA 2 (60Secs) - 19
P183E - Exit Delay Time for AREA 3 (60Secs) -19
P28E - Siren Reset Time - 31
P19E - Security Delay Zones (None) - 20
P20E - Instant Zones (Zoines 3-24) - 17,18
P21E - Entry Delay Zones (Zone 1) - 17,18
P22E - Handover Zones (Zone 2) - 17,18
P23E - Secondary Delay Zones (None) - 17,18
P271E - Single Trigger Zones (All Zones) - 16
P272E - Double Trigger Zones (No Zones) - 16
P251E - Zone Sensitivity Level - 16
P252E - Zone Sensitivity Level - 16
P253E - Zone Sensitivity Level - 16
P254E - Zone Sensitivity Level (All Zones) - 16
P255E - Zone Sensitivity Level - 16
P256E - Zone Sensitivity Level - 16
P257E - Zone Sensitivity Level - 16
P258E - Zone Sensitivity Level - 16
P261E - Vibration Sensitivity Extreme - 17
P262E
P263E
P264E
P265E
P266E
P267E
P268E - Vibration Sensitivity Low
P271E - 1 Trigger ( All Zones ) - 17
P272E - 2 Trigger ( None ) - 17
P291E - Siren Lockout Zones (All Zones) - 17
P292E - Siren Lockout Tamper Alarms (All) - 21
P293E - Siren Lockout Systems Alarms (None) - 21
P294E - Siren Lockout Power Alarms (None) - 23
P301E - Excludable Zones (All Zones) -17
P302E - Excludable Tamper Zones (All) - 21
P303E - Excludable Systems Zones (All) - 21
P304E - Excludable Power Zones (All) - 23
P310E - Assign Zones to ADMIN AREA (All Zones) - 20
P311E - Assign Zones to AREA 1 (None) - 20
P312E - Assign Zones to AREA 2 (None) - 20
P313E - Assign Zones to AREA 3 (None) - 20
P321E - Assign Zones to MONITOR 1 (None) - 19,20
P322E - Assign Zones to MONITOR 2 (None) - 19,20
P33E
1E - Two Button Keypad Operation (Off) - 28,29
2E - Shortcut ARMING (On) - 28,29
3E - Shortcut EXCLUDE (On) - 28,29
P34E
1E - Keyswitch Unrestricted Operation (Off) - 32
2E - Pop Siren on K/S Arm/Disarm (Off) - 32
3E - No Auto Exclude (Off) - 32
4E - Entry Beeps (On) - 33
5E - (Not Used)
6E - No Zone Tamper (On) - 33
7E - AUX 1 Armed (Off) - 33
8E - Instant Zone Warning (Off) - 33
ZONE ARMED TO OUTPUT (XX=OUTPUT GROUP)
P35 xxE - Zones When ARMED Output (All Zones : P351E) - 19
P36 xxE - Zones When Disarmed Output (All Zones : P360E) - 19
P37 xxE - Zones In Monitor Mode Output (All Zones : P3720E) - 19
P38 xxE - 24 Hour Zones Output (All Zones : P380E) - 19
P39 xxE - Tamper Alarms Output (All Zones : P3927E) -21
P40 xxE - Systems Alarms Output(Various) - 22
P41 xxE - Power Alarms Output(Various) - 23
P42 xxE 1E - General Purpose Timer Output (Disabled : P420E) - 30
CREATE INSTALLER DEFINED OUTPUT GROUPS
P43xxE - Options for Configurable Output Groups 1-15 - 27
P44E - Zones With No Exit Delay (None) - 18
P45E
1E - Installation WALK TEST (Select Zones to Test) -12
2E - Enable Auto Zone Test (Off) - 12
P50E - Client Code for Central Station (0000) - 34
P51E - Telephone Number 1, Primary (None) - 34
P52E - Telephone Number 2, Secondary (None) - 34
P53E - Upload / Download Phone Number - 34
P54E
1E - HSX (On) - 35 - 39
2E - Audible Voice Reporting Format (Off) - 35 - 39
3E - Contact ID Reporting Format (Off) - 35 - 39
P55E
1E - Auto Dialling Pulse & VF (On) - 39
2E - Pulse Dialling Always (Off) - 39
3E - VF Dialling Always (Off) - 39
P56E - Country Dial
1E - Australia ( On ) - 42
2E - New Zealand ( Off ) - 42
P57E
1E - Alternative Dialling Pri/Sec Phone Number (On) - 42
2E - Dial Each Telephone Number 5 Times (Off) - 42
3E - Repeat to Telephone Number 2 (Off) - 42
P58E
1E - Remote Command / Callback Option 1 (Off) - 11,40
2E - Remote Command / Callback Option 2 (Off) - 11,40
3E - Enable Remote ARM, ADMIN AREA (Off) - 40,41
4E - Enable Remote ARM, AREA 1 (Off) - 40,41
5E - Enable Remote ARM, AREA 2 (Off) - 40,41
6E - Enable Remote ARM, AREA 3 (Off) - 40,41
7E - Enable Remote Operation, AUX 1/2 (Off) - 40,41
8E - Enable Remote Disarm, ALL AREAS (Off) - 40,41
P59E - Required Rings for Auto-Answer (1) - 42
P60E
1E - Enable Open/Close Reports (On) - 43
2E - Send ADMIN. Area O/C Reports Only (Off) - 43
3E - Send Open/Close With P75xxE Client Codes (Off) - 43
4E - Disable Open/Closed Reports (Off) - 43
P61E - Map Zones to Contact ID Channels (See Page 44)
P62E - Map Tamper Alarms to Contact ID (See Page 44)
P63E - Map System Alarms to Contact ID (See Page 44)
P64E - Map Power Alarms to Contact ID (See Page 44)
P65E
1E - Disable Multiple Zone Alarm Reports (On) - 44
2E - Enable Multiple Zone Alarm Reports (Off) - 44
P66E
1E - Send Restorals After Siren Time (Off) - 44
2E - Send Restorals on Disarm (Off) - 44
3E - Send Restorals Immediately (On) - 44
4E - Do not Send Restorals (Off) - 44
P67E - Mains Fail Reporting Delay (60 Minutes) - 45
P68E - Abort Delay (30 Seconds) - 45
P69E - Abort Delay Zones (None) - 45
P70E - Time Before First Test Call (168 Hours) -45
P71E - Test Call Interview (Disabled) - 45
P72E 1E - Enable Easy Call Feature (Off) - 46,47
P73E - Digits to Dial After Opening (Disabled) - 46,47
P74E - Digits to Dial After Closing (Disabled) - 46,47
CREATE INSTALLER DEFINED OUTPUT GROUPS - METHOD 2
P80xxE - Installer Defined Output (Groups 1-15, Outputs 1-10) - 27
P81xxE - Installer Defined Output (Groups 1-15, Outputs 11-16) - 27
P82E
1E - Enable Satellite ( Off ) - 31
2E - Enable Dialler (On) - 31
3E - Enable Radio Interface (Off) - 31
4E - Enable Output Expander (Off) - 31
P93E - Medical Delay (Disabled) - 29
P94E - General Purpose Timer Delay (Disabled) - 30
P95E - General Purpose Timer Duration (Disabled) - 30
P96E - Code Retry Limit (2) - 31
P97E - Duress Prefix (9) - 31
P981E - Default Panel Options (except Dialler, Codes & Delays) - 11
P982E - Default User Codes, Installer Codes & Entry / Exit Delay Times - 11
P983E - Default Dialler Options - 11,34
P984E - Clear Alarm Memory - 11
P985E - Clear Dialler Buffer (If In Dialler Mode) - 11,34
P99E - Program Installer Code (000000) - 10
P + E - Exit Program Mode